Insulating without Thermal Break - White Interior - New Roof for Steel and Metal Buildings

Insulation without a Thermal Break - White Interior - New Metal Roof Application

Installation Instructions

  • The InfraStop® Insulation is installed with the “white side” towards the interior of the building.

  • After the red metal is erected, install the InfraStop® double bubble insulation over the purlins by using 1/2” self-taping metal screws and screwing the product to the purlins.

  • Maintain a 3/4" drape with the insulation in the center between the trusses."

  • Tape the seams with InfraStop® Foil Tape (goal is an air-tight, snug seam seal).

  • Install roofing either by screwing corrugated metal screws through the thermal break and insulation to the purlin or install a standing seam roof

  • If an interior finish is to be installed, attach to the bottom of the purlins.

Standard Size for Metal Buildings: Square Edge and Staple Tab

Custom Size Rolls for Metal Buildings: Square Edge

Thermal Insulation

Open Interior - 4.0* Heat Flow Down (and a Radiant Barrier) | R-3.2* Heat Flow Up

Please Note: In addition to the stated R-value, this application also provides a Radiant Barrier. As a result, a 94% + reduction of the radiant energy that ordinarily would be transmitted to the interior of the building is blocked.

*Includes thermal resistance of 0.61 UP and 0.92 DOWN for interior air film.

Product Information

InfraStop® Insulation products are a group of technologically advanced materials. They are ideal for new construction or retrofit applications in commercial, industrial, metal and post/frame buildings, along with many other DIY applications. When you think of insulation, you should think of InfraStop®. Our products are recognized for their thermal performance, easy installation, versatility, price and environmental friendliness.


  • Easy to handle and install
  • Convenient roll sizes
  • Class A / Class 1 Fire Rating
  • Inhibits dew point condensation
  • Vapor retarder (0.02 perms)
  • Does not compress, collapse or disintegrate
  • Non-toxic / non-carcinogenic

Testing and Certification

InfraStop® products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at

  • Foil Both Sides - Steel and Metal Building Insulation
  • Metal and Steel Building Page

Email Us your Quote has a Shopper Approved rating of 4.8/5 based on 542 ratings and reviews