Tempshield™ 60" x 50' Square Edge Double Bubble White Reflective Foil Insulation

Testing & Certifications
All tests on Tempshield™ Insulation products are performed at either nationally
approved independent laboratories or at leading universities. Tests are
performed to current American Society of Testing and Materials (ASTM)
Standards when a standard exists.

Testing results on our Reflective Insulation (Reflective/Bubble/Bubble/
Reflective) product are listed below. For any additional testing information
for this product (or any other), please feel free to call or contact us.

Nominal Thickness - 5/16” (.312)
Weight - 0.771 oz./ft²
Temperature Range - 60° to 180° F
Flame Spread - Less than 25*
Smoke Development - Less than 50*
Perm. Rating - 02**
Puncture Resistance - 60 lb./in.***
Vapor Transmission - 02
Mold and Mildew - No Growth
Emittance - 04
Tensile Strength - 3.7 N/mm
Pliability - No Cracking
Hot Surface Performance - Passed (250° F)

• Not for use in direct contact on surface temperatures that are
  180° F or greater.
• * Intertek Testing ASTM Test Method E-84 **ASTM Test E-96 ***FSTM 101 B Method 2031
  

Product Standards
Resistance to fungi or bacteria: Tempshield™ does not promote the growth of
fungi or bacteria.

Specification compliance: Tempshield™ is covered under the Federal Minimum
Standards Code for reflective insulation (HH-I-1252B) for all H.U.D. and
F.H.A. projects.

Testing and Certification Documents

• Thermal Performance ASTM C1363
  
• Thermal Performance of Wall Systems ASTM C1363
  
• Thermal Performance ASTM C335
  
• Thermal Performance of Crawl Space ASTM C1363
  
• Hot Surface Performance ASTM C411
  
• Heat Transfer (Heat Flow Up, Down, Horizontal) ASTM C1363
  
• Thermal Performance of Tempshield™ and Fiberglass in Walls ASTM C1363
  
• Heat Transfer of Air-Handling Ducts with Tempshield™
  
• Flame Spread and Smoke Density ASTM E84
  
• Fungus Resistance Mil-Std 810B Method 508
  
• Pliability Test
  
• Sound Absorption Test ASTM C423-90a and ASTM E795-83
  
• Sound Transmission Loss ASTM E90-90 and ASTM E413-87
  
• Water Vapor Transmission ASTM E96
  
• Tensile Strength
  
• Emittance Testing
  
• Thermal Performance of Water Heater Jackets
  
• Intertek: Surface Burning Characteristics of Building Materials ASTM E84-08
  (Taped Joint Detail) Test Report # 3166908SAT-012
  
• Intertek: Surface Burning Characteristics of Building Materials ASTM E84-08
  (Unslit) Test Report # 3166908SAT-011
  
• R&D Services: Resistance to the Growth of Fungi ASTM C1338-00 Test Report
  # RD072713FR
  
• State of California
  
• State of California Licensed Insulation Manufacturer
  
• State of Minnesota: Filed with Minnesota Insulation Standards
  Program
  
• State of Wisconsin: Wisconsin Material Approval, Safety and Buildings
  Division Approval # 920088-1
  
• R&D Services Emittance Testing
  
• R&D Services: Physical Properties Sheet Width, Length, Pliability, Water Vapor
  Permanence and Aged Water Vapor Permanence
  
• R&D Services: Water Vapor Transmission Test ASTM-E96 (Dessicant Method