Super R Diamond® Radiant Barrier 48″ x 125′
$57.25
- 4 Mil Thickness
- Clean Lightweight, Easy to Install
- Saves Money and Energy
- For Residential Retrofit
- Meets new ASTM E84 and E2599 Fire Code
- Description
- Additional Info
- InfraStop® Specs
Description
Super R Diamond® is two-sided reflective aluminized polyester film with reinforced scrim inside, designed to reflect radiant heat no matter what the season. Choose Super R Diamond® to retrofit an existing structure. It can be stapled to the underside of the roof rafters in an attic, or laid directly over mass insulation for a noticeable increase in energy savings and increased comfort level.
| Model Number | ISRBD48125 |
|---|---|
| Roll Width | 48 Inch |
| Roll Length | 125 Feet |
| Per Roll Square Foot | 500 |
| Weight | 14.5 lbs. per 1000 square foot roll |
| Tensile / Tear Strengh (ASTM D2261) | Length 2.32 / Width 1.50 Pounds Force |
| Pliability (ASTM C1313-05) | 70 degrees +/- 5 degrees F & 50% Relative Humidity – No Cracking or Delamination |
| Adhesive Performance (ATM 1313-05) | 180 +/- 5 degrees F & 50 % Relative Humidity – No Bleeding or Delamination |
| Flame & Smoke Spread (ASTM E84-10) | Class A / Class 1 – 0 Flame Spread, 10 Smoke Development |
| Resistance to Fungi (ASTM C1338-08) | Pass – No Growth |
| Permiability (ASTM E96-05) | 9.6 Perms |
| Reflectivity (C1371-04a) | 95% |
| Emissivity (ASTM C1371-04a) | 0.05 |
Testing & Certifications
All tests on InfraStop® Insulation products are performed at either nationally
approved independent laboratories or at leading universities. Tests are
performed to current American Society of Testing and Materials (ASTM)
Standards when a standard exists.
Testing results on our Reflective Insulation (Reflective/Bubble/Bubble/
Reflective) product are listed below. For any additional testing information
for this product (or any other), please feel free to call or contact us.
Product Standards
Resistance to fungi or bacteria: InfraStop® does not promote the growth of
fungi or bacteria.
Specification compliance: InfraStop® is covered under the Federal Minimum Standards Code for reflective insulation (HH-I-1252B) for all H.U.D. and F.H.A. projects.
Testing and Certification Documents
- Thermal Performance ASTM C1363
- Thermal Performance of Wall Systems ASTM C1363
- Thermal Performance ASTM C335
- Thermal Performance of Crawl Space ASTM C1363
- Hot Surface Performance ASTM C411
- Heat Transfer (Heat Flow Up, Down, Horizontal) ASTM C1363
- Thermal Performance of InfraStop™ and Fiberglass in Walls ASTM C1363
- Heat Transfer of Air-Handling Ducts with InfraStop™
- Flame Spread and Smoke Density ASTM E84
- Fungus Resistance Mil-Std 810B Method 508
- Pliability Test
- Sound Absorption Test ASTM C423-90a and ASTM E795-83
- Sound Transmission Loss ASTM E90-90 and ASTM E413-87
- Water Vapor Transmission ASTM E96
- Tensile Strength
- Emittance Testing
- Thermal Performance of Water Heater Jackets
- Intertek: Surface Burning Characteristics of Building Materials ASTM E84-08
(Taped Joint Detail) Test Report # 3166908SAT-012 - Intertek: Surface Burning Characteristics of Building Materials ASTM E84-08
(Unslit) Test Report # 3166908SAT-011 - R&D Services: Resistance to the Growth of Fungi ASTM C1338-00 Test Report
# RD072713FR - State of California
- State of California Licensed Insulation Manufacturer
- State of Minnesota: Filed with Minnesota Insulation Standards
Program - State of Wisconsin: Wisconsin Material Approval, Safety and Buildings
Division Approval # 920088-1 - R&D Services Emittance Testing
- R&D Services: Physical Properties Sheet Width, Length, Pliability, Water Vapor
Permanence and Aged Water Vapor Permanence - R&D Services: Water Vapor Transmission Test ASTM-E96 (Dessicant Method
