Insulation on Outside of Girts – New Wall Application – Post Frame Buildings & Pole Barns
Insulation Outside Girts - New Wall Application
Installation Instructions
- Staple the InfraStop® double bubble insulation to the outside of the top girt.
- Staple the insulation to the outside of the remaining girts. Insure there is a drape of at least 3/4″ (towards the interior of the building) at the center of each cavity./p>
- Tape the seams with InfraStop® Foil Tape (goal is an air-tight, snug seam seal.)
- Attach outside panel.
- Atach interior panel to the inside of the girts (if specified).
Standard Sizes for Barns
Custom Sizes for Barns
Thermal Insulation
Metal Interior – R-5.5 Heat Flow Horizontal
Open Interior – R-4.7* Heat Flow Horizontal
*Includes thermal resistance of 1.70 interior air film.
Product Information
InfraStop® Insulation products are a group of technologically advanced materials. They are ideal for new construction or retrofit applications in commercial, industrial, metal and post/frame buildings, along with many other DIY applications. When you think of insulation, you should think of InfraStop®. Our products are recognized for their thermal performance, easy installation, versatility, price and environmental friendliness.
Benefits
- Easy to handle and install
- Convenient roll sizes
- Class A / Class 1 Fire Rating
- Inhibits dew point condensation
- Vapor retarder (0.02 perms)
- Does not compress, collapse or disintegrate
- Non-toxic / non-carcinogenic
Testing and Certification
InfraStop® products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at customer.support@insulationstop.com.
