Insulation Inside Girts - Existing Wall Application
Installation Instructions
- Pre-installation inspection – Check the roof area for clutter, water sprinklers, conduit and lights. Sprinkler systems are especially important. All water pipes must be below the InfraStop® to prevent the possibility of freezing in the winter.
- The InfraStop® double bubble insulation can be installed either vertically or horizontally.
- Attach the product to the inside of the girts using 5/16” staples.
- Tape the seams with a InfraStop® Foil Tape (goal is an air-tight, snug seam seal).
- Staple product at approximately 4” intervals into the girts.
- For interior covering, attach 1”x 2” furring strips perpendicular to the girts through the insulation.
- Attach interior panel to the furring strips.
- This will provide a 1” (nominal) air space between the interior panel and the insulation and a 1 1/2” air space between the insulation and the outside panel.
Thermal Insulation
Metal Interior – R-6.3 Heat Flow Horizontal
Open Interior – R-5.3* Heat Flow Horizontal
*Includes thermal resistance of 1.70 interior air film.
Product Information
InfraStop® Insulation products are a group of technologically advanced materials. They are ideal for new construction or retrofit applications in commercial, industrial, metal and post/frame buildings, along with many other DIY applications. When you think of insulation, you should think of InfraStop®. Our products are recognized for their thermal performance, easy installation, versatility, price and environmental friendliness.
Benefits
- Easy to handle and install
- Convenient roll sizes
- Class A / Class 1 Fire Rating
- Inhibits dew point condensation
- Vapor retarder (0.02 perms)
- Does not compress, collapse or disintegrate
- Non-toxic / non-carcinogenic
Testing and Certification
InfraStop® products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at customer.support@insulationstop.com.