Post Frame Building - White Roof Retrofit - Bottom of Truss

Post Frame Retro Roof White Bottom of Truss Post Frame Building - Product: Reflective One Side

Below the Truss: Open Interior
R-6.6* Heat Flow Down | R-3.0* Heat Flow Up

* Includes thermal resistance of 0.61 UP and 0.92 DOWN for interior air film.

Calculation Disclaimer: All values are calculated based on the "ASHRAE Handbook of Fundamentals". Heat flow up and down

Tempshield™ Insulation products are a group of technologically advanced materials. They are ideal for new construction or retrofit applications in commercial, industrial, metal and post/frame buildings, along with many other DIY applications. When you think of insulation, you should think of Tempshield™. Our products are recognized for their thermal performance, easy installation, versatility, price and environmental friendliness.

Standard Size Recommended Products:

Custom Size Recommended Products:

Benefits:

Easy to handle and install
Convenient roll sizes
Class A / Class 1 Fire Rating
Inhibits dew point condensation
Vapor retarder (0.02 perms)
Does not compress, collapse or disintegrate
Non-toxic / non-carcinogenic

Testing and Certification:

Tempshield™ products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at customer.support@insulationstop.com.

Air Space Requirements:
Post Frame Building Air Space Requirements

Installation Instructions:
Post Frame - White Retro Roof - Bottom of Truss Installation Instruction

The Tempshield™ Insulation is installed with the “white side” towards the interior of the building.
Pre-installation inspection - Check the roof area for clutter, water sprinklers, conduit and lights. Sprinkler systems are especially important. All water pipes must be below the Tempshield™ Reflective/Bubble/Bubble/White Insulation to prevent the possibility of freezing in the winter.
Nail 1”x 2” furring strips on the bottom of and perpendicular to the trusses on 22” centers. (Note: When truss spacing is 24” it is recommended to install the Tempshield™ Reflective/Bubble/Bubble/White 48” product directly to the bottom cord of the truss.)
Butt the furring strips together and tape. Staple tape for reinforcement.
Staple the edges of the Tempshield™ to the furring strip with 5/16" staples. Run subsequent courses of the product with a 3/4” overlap at the seams.
Tape the seams with a Tempshield™ Foil Tape (goal is an air-tight, snug seam seal).
Tape any butt seams with Tempshield™ Foil Tape, insure taped seam has a good full continuous bond.
Staple product at approximately 4” intervals down the middle of the sheet into the furring strip above.

Important: Review These Important Safety Guidelines Prior to Installation.

User Access

Information

Payment Methods

Owned and operated by The Semon Group, Inc.

InsulationStop.com

Post Frame Building - White Roof Retrofit - Bottom of Truss