Post Frame Building - Retrofit Wall White

Post Frame Retrofit Wall White Inside the Girts Product: Reflective One Side

Inside the Girts: Open Interior
R-4.2* Heat Flow Horizontal

* Includes thermal resistance of 0.68 interior air film.

Calculation Disclaimer: All values are calculated based on the "ASHRAE Handbook of Fundamentals".

Tempshield™ Insulation products are a group of technologically advanced materials. They are ideal for new construction or retrofit applications in commercial, industrial, metal and post/frame buildings, along with many other DIY applications. When you think of insulation, you should think of Tempshield™. Our products are recognized for their thermal performance, easy installation, versatility, price and environmental friendliness.

Standard Size Recommended Products:

Custom Size Recommended Products:

Benefits:

Easy to handle and install
Convenient roll sizes
Class A / Class 1 Fire Rating
Inhibits dew point condensation
Vapor retarder (0.02 perms)
Does not compress, collapse or disintegrate
Non-toxic / non-carcinogenic

Testing and Certification:

Tempshield™ products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at customer.support@insulationstop.com.

Air Space Requirements:
Post Frame Building Air Space Requirements

Installation Instructions:
Post Frame - Retro Wall White - Installation Instruction

The Tempshield™ Insulation is installed with the “white side” towards the interior of the building.
Pre-installation inspection - Check the roof area for clutter, water sprinklers, conduit and lights. Sprinkler systems are especially important. All water pipes must be below the Tempshield™ Reflective/Bubble/Bubble/White Insulation to prevent the possibility of freezing in the winter.
empshield™ Reflective/Bubble/Bubble/White Insulation can be installed either vertically or horizontally.
Attach the product to the inside of the girts using 5/16” staples.
Staple product at approximately 4” intervals into the girts.
Tape the seams with a Tempshield™ Foil Tape (goal is an air-tight, snug seam seal).

Important: Review These Important Safety Guidelines Prior to Installation.

User Access

Information

Payment Methods

Owned and operated by The Semon Group, Inc.

InsulationStop.com

Post Frame Building - Retrofit Wall White