Post Frame Building - Retrofit Wall

Product: Reflective Both Sides

 

Inside the Girts: Metal Interior
R-6.3 Heat Flow Horizontal

Inside the Girts: Open Interior
R-5.3* Heat Flow Horizontal

* Includes thermal resistance of 1.70 interior air film

Calculation Disclaimer: All values are calculated based on the "ASHRAE Handbook of Fundamentals".

Tempshield™ Insulation products are a group of technologically advanced materials. They are ideal for new construction or retrofit applications in commercial, industrial, metal and post/frame buildings, along with many other DIY applications. When you think of insulation, you should think of Tempshield™. Our products are recognized for their thermal performance, easy installation, versatility, price and environmental friendliness.

Standard Size Recommended Products:

• 24" x 125' Reflective/Double Bubble/Reflective - STAPLE TAB
• 48" x 100' Reflective/Double Bubble/Reflective - STAPLE TAB
• 48" x 125' Reflective/Double Bubble/Reflective - STAPLE TAB

Benefits:

• Easy to handle and install
• Convenient roll sizes
• Class A / Class 1 Fire Rating
• Inhibits dew point condensation
• Vapor retarder (0.02 perms)
• Does not compress, collapse or disintegrate
• Non-toxic / non-carcinogenic

Testing and Certification:

Tempshield™ products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at customer.support@insulationstop.com.

Air Space Requirements:
Post Frame Building Air Space Requirements

Installation Instructions:
Post Frame - Retro Wall - Installation Instruction

• Pre-installation inspection - Check the roof area for clutter, water sprinklers, conduit and lights. Sprinkler systems are especially important. All water pipes must be below the Tempshield™ Reflective/Bubble/Bubble/Reflective Foil, Staple Tab product to prevent the possibility of freezing in the winter.
• The Tempshield™ Reflective/Bubble/Bubble/Reflective, Staple Tab product can be installed either vertically or horizontally.
• Attach the product to the inside of the girts using 5/16” staples.
• Tape the seams with a Tempshield™ Foil Tape (goal is an air-tight, snug seam seal).
• Staple product at approximately 4” intervals into the girts.
• For interior covering, attach 1”x 2” furring strips perpendicular to the girts through the insulation.
• Attach interior panel to the furring strips.
• This will provide a 1” (nominal) air space between the interior panel and the insulation and a 1 1/2” air space between the insulation and the outside panel.

Important: Review These Important Safety Guidelines Prior to Installation.