Post Frame Building - New Wall White

Post Frame New Wall White Inside the Girts Product: Reflective One Side

Inside the Girts: Open Interior
R-4.2* Heat Flow Horizontal

Outside the Girts: Open Interior
R-3.7* Heat Flow Horizontal

* Includes thermal resistance of 0.68 interior air film.

Calculation Disclaimer: All values are calculated based on the "ASHRAE Handbook of Fundamentals".

Tempshield™ Insulation products are a group of technologically advanced materials. They are ideal for new construction or retrofit applications in commercial, industrial, metal and post/frame buildings, along with many other DIY applications. When you think of insulation, you should think of Tempshield™. Our products are recognized for their thermal performance, easy installation, versatility, price and environmental friendliness.

Standard Size Recommended Products: Post Frame New Wall White Outside the Girts

Custom Size Recommended Products:

Benefits:

Easy to handle and install
Convenient roll sizes
Class A / Class 1 Fire Rating
Inhibits dew point condensation
Vapor retarder (0.02 perms)
Does not compress, collapse or disintegrate
Non-toxic / non-carcinogenic

Testing and Certification:

Tempshield™ products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at customer.support@insulationstop.com.

Air Space Requirements:
Post Frame Building Air Space Requirements

Installation Instructions:
Post Frame - New Wall White- Installation Instruction

1. Product Inside the Girts

The Tempshield™ Insulation is installed with the “white side” towards the interior of the building.
Staple the Tempshield™ Reflective/Bubble/Bubble/White product to the outside of the top girt.
Staple the product to the inside of the remaining girts.
Tape the seams with a Tempshield™ Foil Tape (goal is an air-tight, snug seam seal).

2. Product Outside the Girts

The Tempshield™ Insulation is installed with the “white side” towards the interior of the building.
Staple the Tempshield™ Reflective/Bubble/Bubble/White product to the outside of the top girt.
Staple the product to the outside of the remaining girts. Insure there is a drape of at least 3/4” (towards the interior of the building) at the center of each cavity.
Tape the seams with a Tempshield™ Foil Tape (goal is an air-tight, snug seam seal).
Attach outside panel.

Important: Review These Important Safety Guidelines Prior to Installation.

User Access

Information

Payment Methods

Owned and operated by The Semon Group, Inc.

InsulationStop.com

Post Frame Building - New Wall White