Insulation With a 3/4" Thermal Break - White Interior - New Metal Roof Application
Installation Instructions
- The InfraStop® Insulation is installed with the “white side” towards the interior of the building.
- After the red metal is erected, install the InfraStop® double bubble insulation over the purlins by using 1/2” self-taping metal screws and screwing the product to the purlins.
- Tape the seams with InfraStop® Foil Tape (goal is an air-tight, snug seam seal).
- Install at least a 3/4” thermal break. If installing a standing seam roof, use clips with thermal breaks.
- Install roofing either by screwing corrugated metal screws through the thermal break and insulation to the purlin or install a standing seam roof
Thermal Insulation
Open Interior – R-5.5* Heat Flow Down (and a Radiant Barrier) | R-3.4* Heat Flow Up
Please Note: In addition to the stated R-value, this application also provides a Radiant Barrier. As a result, a 94% + reduction of the radiant energy that ordinarily would be transmitted to the interior of the building is blocked.
*Includes thermal resistance of 0.61 UP and 0.92 DOWN for interior air film.
Product Information
InfraStop® Insulation products are a group of technologically advanced materials. They are ideal for new construction or retrofit applications in commercial, industrial, metal and post/frame buildings, along with many other DIY applications. When you think of insulation, you should think of InfraStop®. Our products are recognized for their thermal performance, easy installation, versatility, price and environmental friendliness.
Benefits
- Easy to handle and install
- Convenient roll sizes
- Class A / Class 1 Fire Rating
- Inhibits dew point condensation
- Vapor retarder (0.02 perms)
- Does not compress, collapse or disintegrate
- Non-toxic / non-carcinogenic
Testing and Certification
InfraStop® products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at customer.support@insulationstop.com.