Metal and Steel Building - New Wall

Product: Reflective Both Sides

Metal Interior with a 3/4" Thermal Break
R-6.8* Heat Flow Horizontal

Open Interior with a 3/4" Thermal Break
R-5.6* Heat Flow Horizontal

Metal Interior with a Nominal 3/4" Drape in Product (No Thermal Break)
R-5.9* Heat Flow Horizontal

Open Interior with a Nominal 3/4" Drape in Product (No Thermal Break)
R-4.7* Heat Flow Horizontal

* Includes thermal resistance of 1.70 interior air film

Calculation Disclaimer: All values are calculated based on the "ASHRAE Handbook of Fundamentals". 

,Tempshield™ Insulation products are a group of technologically advanced materials. They are ideal for new construction or retrofit applications in commercial industrial, metal and post/frame buildings, along with many other DIY applications. When you think of insulation, you should think of Tempshield™. Our products are recognized for their thermal performance, easy installation, versatility, price and environmental friendliness

Standard Size Recommended Products:

• 24" x 125' Reflective/Double Bubble/Reflective - STAPLE TAB
• 48" x 100' Reflective/Double Bubble/Reflective - STAPLE TAB
• 48" x 125' Reflective/Double Bubble/Reflective - STAPLE TAB

Benefits:

• Easy to handle and install
• Convenient roll sizes
• Class A / Class 1 Fire Rating
• Inhibits dew point condensation
• Vapor retarder (0.02 perms)
• Does not compress, collapse or disintegrate
• Non-toxic / non-carcinogenic

Testing and Certification:

Tempshield™ products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at customer.support@insulationstop.com.

Air Space Requirements:
Metal and Steel Building Air Space Requirements

Installation Instructions:
Metal and Steel Building - New Wall - Installation Instruction

1. Installed with 3/4" Thermal Breaks

• Install Tempshield™ Reflective/Bubble/Bubble/Reflective, Staple Tab product vertically, using 1 1/4” self tapping screws. This will secure the insulation to the exterior of the C or Z girts.
• Tape the seams with a Tempshield™ Foil Tape (goal is an air-tight, snug seam seal).
• Install a 3/4” thermal break and attach corrugated metal exterior finish.
• If an interior finish is applied, install the interior panels to the interior face of the girts. This will create a 3/4” air space between the exterior finish and the insulation and an 8” air space between the insulation and the interior finish.

2. Installed with a 3/4" Drape in Product (No Thermal Break)

• When installing the product, insure there is a drape (towards the interior) of at least 3/4” at the center of the cavity.

Important: Review These Important Safety Guidelines Prior to Installation.