Metal and Steel Building - New Roof White

Metal Steel Building New Roof with Thermal Break Product: Reflective One Side

Open Interior with 3/4" Thermal Breaks
R-5.5* Heat Flow Down
R-4.1* Heat Flow Up

Open Interior with 3/4" Thermal Breaks and a Nominal 3/4" Drape
R-4.0* Heat Flow Down
R-3.2* Heat Flow Up

* Includes thermal resistance of 0.61 UP and 0.92 DOWN for interior air film.

Calculation Disclaimer: All values are calculated based on the "ASHRAE Handbook of Fundamentals". Heat flow up and down

Tempshield™ Insulation products are a group of technologically advanced materials. They are ideal for new construction or retrofit applications in commercial, industrial, metal and post/frame buildings, along with many other DIY applications. When Metal Steel Building New Roof without Thermal Break you think of insulation, you should think of Tempshield™. Our products are recognized for their thermal performance, easy installation, versatility, price and environmental friendliness.

Standard Size Recommended Products:

Custom Size Recommended Products:

Benefits:

Easy to handle and install
Convenient roll sizes
Class A / Class 1 Fire Rating
Inhibits dew point condensation
Vapor retarder (0.02 perms)
Does not compress, collapse or disintegrate
Non-toxic / non-carcinogenic

Testing and Certification:

Tempshield™ products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at customer.support@insulationstop.com.

Air Space Requirements:
Post Frame Building Air Space Requirements

Installation Instructions:
Post Frame - New White Roof Above and Below Purlin- Installation Instruction

1. Metal Roof with Product below Purlin (first illustration)

The Tempshield™ Insulation is installed with the “white side” towards the interior of the building.
After the trusses are set, run two purlins to make sure the trusses stay true.
Attach the Tempshield™ Reflective/Bubble/Bubble/White product to the first truss with at least 5/16” staples. Temporarily nail a 2”x 4” block over the end of the product to prevent it from pulling away.
Roll out the product across the top of the trusses, pull tight and staple.
Run subsequent courses of the product with a 3/4” overlap at the seams.
Tape the seams with a Tempshield™ Foil Tape (goal is an air-tight, snug seam seal).
Install purlins over the insulation. Nail or screw to the trusses through the product.
Install the metal roof to the purlins.

Benefits:

Easy to handle and install
Convenient roll sizes
Class A / Class 1 Fire Rating
Inhibits dew point condensation
Vapor retarder (0.02 perms)
Does not compress, collapse or disintegrate
Non-toxic / non-carcinogenic

Testing and Certification:

Air Space Requirements:
Metal and Steel Building Air Space Requirements

Installation Instructions:
Metal and Steel Building - New Roof White - Installation Instruction

1. Open Interior with 3/4" Thermal Breaks

The Tempshield™ Insulation is installed with the “white side” towards the interior of the building.
After the red metal is erected, install the Tempshield™ Reflective/Bubble/Bubble/White product over the purlins by using 1/2” self-taping metal screws and screwing the foil to the purlins.
Tape the seams with a Tempshield™ Foil Tape (goal is an air-tight, snug seam seal).
Install at least a 3/4” thermal break. If installing a standing seam roof, use clips with thermal breaks.
Install roofing either by screwing corrugated metal screws through the thermal break and insulation to the purlin or install a standing seam roof.

2. Open Interior with 3/4" Thermal Breaks and a Nominal 3/4" Drape

Per instructions above without the thermal break.

Important: Review These Important Safety Guidelines Prior to Installation.

InsulationStop.com

Metal and Steel Building - New Roof White