IInsulating a Workshop

Insulation for a Workshop

Installation Instructions

Installation Instructions

1. Roof

2. Wall - Masonry R-3.7 to R-6.1

3. Wall - 2”x 4” R-6.1 (no fiberglass)

  • Determine if studs are 16” or 24” on center (This will determine whether InfraStop® 16” or 24” product is utilized).

  • Place one corner edge of the InfraStop® in an upper corner of the stud cavity. At a point that splits the stud cavity; staple the product to the side of the stud (creating a 3/4” tab on the product).

  • Proceed “down”, stapling to the side of the stud every 2"- 3”.

  • Repeat procedure on opposite stud.

  • The Goal: Create two approximately equal continuous 1 3/4” air spaces on each side of the InfraStop® Insulation.

  • This application also provides a vapor/moisture barrier.

  • Finish wall interior with a panel or sheathing (Product is not specified as an interior wall covering).

4. Wall - 2”x 4” R-14 Total Assembly

(R-3.9 and a Vapor Moisture Barrier for the InfraStop®)

Square Edge Roll Sizes

Thermal Insulation

Insulation for a Workshop

Product Information

InfraStop® Insulation products are a group of technologically advanced materials. They are ideal for new construction or retrofit applications in commercial, industrial, metal and post/frame buildings, along with many other DIY applications. When you think of insulation, you should think of InfraStop®. Our products are recognized for their thermal performance, easy installation, versatility, price and environmental friendliness.

Benefits

  • Easy to handle and install
  • Convenient roll sizes
  • Class A / Class 1 Fire Rating
  • Inhibits dew point condensation
  • Vapor retarder (0.02 perms)
  • Does not compress, collapse or disintegrate
  • Non-toxic / non-carcinogenic

Testing and Certification

InfraStop® products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at customer.support@insulationstop.com.

  • Other DIY Insulation Projects

Email Us your Quote