Insulation Inside Girts - White Interior - Existing Wall Application
The InfraStop® Insulation is installed with the “white side” towards the interior of the building.
Pre-installation inspection - Check the roof area for clutter, water sprinklers, conduit and lights. Sprinkler systems are especially important. All water pipes must be below the InfraStop® to prevent the possibility of freezing in the winter.
The InfraStop® double bubble white insulation can be installed either vertically or horizontally.
Attach the product to the inside of the girts using 5/16” staples.
Tape the seams with a InfraStop® Foil Tape (goal is an air-tight, snug seam seal).
Staple product at approximately 4” intervals into the girts.
Standard Size Rolls for Barns: Square Edge and Staple Tab
Custom Size Rolls for Barns: Square Edge
Open Interior - R-5.3* Heat Flow Horizontal
*Includes thermal resistance of 0.68 interior air film.
InfraStop® Insulation products are a group of technologically advanced materials. They are ideal for new construction or retrofit applications in commercial, industrial, metal and post/frame buildings, along with many other DIY applications. When you think of insulation, you should think of InfraStop®. Our products are recognized for their thermal performance, easy installation, versatility, price and environmental friendliness.
- Easy to handle and install
- Convenient roll sizes
- Class A / Class 1 Fire Rating
- Inhibits dew point condensation
- Vapor retarder (0.02 perms)
- Does not compress, collapse or disintegrate
- Non-toxic / non-carcinogenic
Testing and Certification
InfraStop® products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at firstname.lastname@example.org.