InfraStop® 84" x 100' Square Edge Double Bubble Reflective Foil Insulation

  • Premium, American Made Reflective Insulation
  • Strong and Durable, 7 Layer Construction
  • Unaffected by Moisture and Humidity
  • Radiant and Vapor Barrier - All in One
  • Class 1 / Class A Fire Rated

Availability: In stock

$239.40

Details

Details

InfraStop® Insulation consists of two outer layers of aluminum foil that reflect over 94% of radiant heat. Each layer of foil is bonded to a tough layer of polyethylene for strength. Two inner layers of insulating bubbles resist conductive heat flow while a center layer of polyethylene gives InfraStop® high reliability and strength.

YouTube Video

Additional Info

Additional Info

YouTube IDCmUtqL0_tNU
Vimeo IDN/A
Model NumberISFDF84100
Roll Width84 Inch
Roll Length100 Feet
Per Roll Square Foot700
Bubble LayerDouble
Edge DetailSquare Edge
Nominal Thickness5/16 Inch (.312)
Weight1.25 oz per square foot
Reflectance (IR)94% +
EmittanceLess than 0.06
Temperature Range-60 to +180 degrees F
Fire RatingClass A / Class 1
Fungi ResistanceNo Growth
Flame Spread Index (ASTM E-84)Less than 25
Smoke Developed Index (ASTM E-84)Less than 50
PliabilityNo Cracking / No Delamination
Bleeding and DelaminationPassed
Linear ShrinkageNone
Permeance After Aging0.015
Permeance Before Aging0.024
Elevated Temperature & Humidity Resistance: DelaminationNone
Elevated Temperature & Humidity Resistance: Loss of MetalizationNone
Elevated Temperature & Humidity Resistance: CorrosionNone

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

InfraStop® Specs

Testing & Certifications
All tests on InfraStop® Insulation products are performed at either nationally
approved independent laboratories or at leading universities. Tests are
performed to current American Society of Testing and Materials (ASTM)
Standards when a standard exists.

Testing results on our Reflective Insulation (Reflective/Bubble/Bubble/
Reflective) product are listed below. For any additional testing information
for this product (or any other), please feel free to call or contact us.

Product Standards
Resistance to fungi or bacteria: InfraStop® does not promote the growth of
fungi or bacteria.

Specification compliance: InfraStop® is covered under the Federal Minimum Standards Code for reflective insulation (HH-I-1252B) for all H.U.D. and F.H.A. projects.

Testing and Certification Documents
  • Thermal Performance ASTM C1363
  • Thermal Performance of Wall Systems ASTM C1363
  • Thermal Performance ASTM C335
  • Thermal Performance of Crawl Space ASTM C1363
  • Hot Surface Performance ASTM C411
  • Heat Transfer (Heat Flow Up, Down, Horizontal) ASTM C1363
  • Thermal Performance of InfraStop™ and Fiberglass in Walls ASTM C1363
  • Heat Transfer of Air-Handling Ducts with InfraStop™
  • Flame Spread and Smoke Density ASTM E84
  • Fungus Resistance Mil-Std 810B Method 508
  • Pliability Test
  • Sound Absorption Test ASTM C423-90a and ASTM E795-83
  • Sound Transmission Loss ASTM E90-90 and ASTM E413-87
  • Water Vapor Transmission ASTM E96
  • Tensile Strength
  • Emittance Testing
  • Thermal Performance of Water Heater Jackets
  • Intertek: Surface Burning Characteristics of Building Materials ASTM E84-08
    (Taped Joint Detail) Test Report # 3166908SAT-012
  • Intertek: Surface Burning Characteristics of Building Materials ASTM E84-08
    (Unslit) Test Report # 3166908SAT-011
  • R&D Services: Resistance to the Growth of Fungi ASTM C1338-00 Test Report
    # RD072713FR
  • State of California
  • State of California Licensed Insulation Manufacturer
  • State of Minnesota: Filed with Minnesota Insulation Standards
    Program
  • State of Wisconsin: Wisconsin Material Approval, Safety and Buildings
    Division Approval # 920088-1
  • R&D Services Emittance Testing
  • R&D Services: Physical Properties Sheet Width, Length, Pliability, Water Vapor
    Permanence and Aged Water Vapor Permanence
  • R&D Services: Water Vapor Transmission Test ASTM-E96 (Dessicant Method