pipe-wrap-insulation-2

InfraStop® 2″ x 25′ Spiral Pipe Wrap Insulation – Case of 6

White Poly Tape 3″ x 165′
InfraStop® 4″ x 25′ Spiral Pipe Wrap Insulation – Case of 12

$62.10

  • R-2.0
  • Fiber and Dust Free
  • Easy to Install
  • Environmentally Safe
  • Resists Mold and Fungi

InfraStop® reflective double bubble insulation is great for pipe wrap applications because the product is so easy economical and easy to install. There is a mix of product types and installation configurations available. InfraStop® Pipewrap Insulation achieves an R 4.0 and is excellent for reducing condensation on cold pipes. The product does not create fibers or dust that would require protective garments or a respirator. The rolls are cut to a very convenient size and can easily be molded or cut to your specific application.

SKU: ISPWS2256 Categories: ,
x

Description

InfraStop® Insulation consists of one outer layer of metalized polyester and one layer of white polyethylene for strength. Each layer is bonded to a tough layer of polyethylene for strength. Two inner layers of insulating bubbles resist conductive heat flow while a center layer of polyethylene gives InfraStop® high reliability and strength.

YouTube ID CmUtqL0_tNU
Vimeo ID N/A
Model Number ISPWS2256
Roll Width 2 Inch
Roll Length 25 Feet
Per Roll Square Foot 4.1666
Bubble Layer Double
Edge Detail Staple Tab
Nominal Thickness 5/16 Inch (.312)
Weight .80 oz per square foot
Reflectance (IR) 94% + Metal Side
Emittance Less than 0.06 Metal Side
Temperature Range -60 to +180 degrees F
Fire Rating Class A / Class 22
Fungi Resistance No Growth
Flame Spread Index (ASTM E-84) Less than 25
Smoke Developed Index (ASTM E-84) Less than 50
Pliability No Cracking / No Delamination
Bleeding and Delamination Passed
Linear Shrinkage None
Permeance After Aging 0.01
Permeance Before Aging 0.023
Elevated Temperature & Humidity Resistance: Delamination None
Elevated Temperature & Humidity Resistance: Loss of Metalization None
Elevated Temperature & Humidity Resistance: Corrosion None

Testing & Certifications
All tests on InfraStop® Insulation products are performed at either nationally
approved independent laboratories or at leading universities. Tests are
performed to current American Society of Testing and Materials (ASTM)
Standards when a standard exists.

Testing results on our Reflective Insulation (Reflective/Bubble/Bubble/
Reflective) product are listed below. For any additional testing information
for this product (or any other), please feel free to call or contact us.

Product Standards
Resistance to fungi or bacteria: InfraStop® does not promote the growth of
fungi or bacteria.

Specification compliance: InfraStop® is covered under the Federal Minimum Standards Code for reflective insulation (HH-I-1252B) for all H.U.D. and F.H.A. projects.

Testing and Certification Documents

  • Thermal Performance ASTM C1363
  • Thermal Performance of Wall Systems ASTM C1363
  • Thermal Performance ASTM C335
  • Thermal Performance of Crawl Space ASTM C1363
  • Hot Surface Performance ASTM C411
  • Heat Transfer (Heat Flow Up, Down, Horizontal) ASTM C1363
  • Thermal Performance of InfraStop™ and Fiberglass in Walls ASTM C1363
  • Heat Transfer of Air-Handling Ducts with InfraStop™
  • Flame Spread and Smoke Density ASTM E84
  • Fungus Resistance Mil-Std 810B Method 508
  • Pliability Test
  • Sound Absorption Test ASTM C423-90a and ASTM E795-83
  • Sound Transmission Loss ASTM E90-90 and ASTM E413-87
  • Water Vapor Transmission ASTM E96
  • Tensile Strength
  • Emittance Testing
  • Thermal Performance of Water Heater Jackets
  • Intertek: Surface Burning Characteristics of Building Materials ASTM E84-08
    (Taped Joint Detail) Test Report # 3166908SAT-012
  • Intertek: Surface Burning Characteristics of Building Materials ASTM E84-08
    (Unslit) Test Report # 3166908SAT-011
  • R&D Services: Resistance to the Growth of Fungi ASTM C1338-00 Test Report
    # RD072713FR
  • State of California
  • State of California Licensed Insulation Manufacturer
  • State of Minnesota: Filed with Minnesota Insulation Standards
    Program
  • State of Wisconsin: Wisconsin Material Approval, Safety and Buildings
    Division Approval # 920088-1
  • R&D Services Emittance Testing
  • R&D Services: Physical Properties Sheet Width, Length, Pliability, Water Vapor
    Permanence and Aged Water Vapor Permanence
  • R&D Services: Water Vapor Transmission Test ASTM-E96 (Dessicant Method