Insulation on Bottom of Truss – Existing Roof White Inside Application – Post Frame Buildings & Pole Barns
Insulation Bottom of Truss - White Interior - Existing Metal Roof Application
Installation Instructions
- The InfraStop® Insulation is installed with the “white side” towards the interior of the building.
- Pre-installation inspection – Check the roof area for clutter, water sprinklers, conduit and lights. Sprinkler systems are especially important. All water pipes must be below the InfraStop® double bubble insulation to prevent the possibility of freezing in the winter.
- Nail 1″ x 2″ furring strips on the bottom of and perpendicular to the trusses on 22″ centers. (Note: When truss spacing is 24″ it is recommended to install the InfraStop® 24″ or 48″ product directly to the bottom cord of the truss.)
- Butt the furring strips tether and tape. Staple tape for reinforcement.”
- Staple the edges of the InfraStop® to the furring strips with the ¾” staple tabs overlapping or square edge butting or overlapping at the seams.”
- Tape the seams with InfraStop® Foil Tape. Goal is an air-tight, snug seam seal.
- Tape any butt seams with InfraStop® Foil Tape, insure taped seam has a good full continuous bond.”
- Staple product at approximately 4″ intervals down the middle of the sheet into the furring strip above.”
White Standard Size for Barns
White Custom Size for Barns
Thermal Insulation
Open Interior – R-6.6* Heat Flow Down (and a Radiant Barrier) | R-3.0* Heat Flow Up
Please Note: In addition to the stated R-value, this application also provides a Radiant Barrier. As a result, a 94% + reduction of the radiant energy that ordinarily would be transmitted to the interior of the building is blocked.
*Includes thermal resistance of 0.61 UP and 0.92 DOWN for interior air film.
Product Information
InfraStop® Insulation products are a group of technologically advanced materials. They are ideal for new construction or retrofit applications in commercial, industrial, metal and post/frame buildings, along with many other DIY applications. When you think of insulation, you should think of InfraStop®. Our products are recognized for their thermal performance, easy installation, versatility, price and environmental friendliness.
Benefits
- Easy to handle and install
- Convenient roll sizes
- Class A / Class 1 Fire Rating
- Inhibits dew point condensation
- Vapor retarder (0.02 perms)
- Does not compress, collapse or disintegrate
- Non-toxic / non-carcinogenic
Testing and Certification
InfraStop® products are thoroughly tested at either nationally approved independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at customer.support@insulationstop.com.
